Installation Planning Of Anchor Bolts

Treatment of the loosening of foundation bolts in the foundation. When the foundation bolts are tightened, the bolts may be pulled out. At this time, the bolts should be adjusted to the original position, and the foundation around the bolts should be shoveled out enough, and then welded on the bolts. The two U-shaped steel bars are vertically and horizontally cleaned and grouted in the pit with water. After the concrete has solidified to the design strength, tighten the live anchor bolts. The treatment method of live anchor bolt deviation is roughly the same as that of dead anchor bolts. Just pull out the anchor bolts for processing. If the bolt is too long, it can be cut off on the machine tool and threaded; if the bolt is too short, it can be extended by hot forging; if the position does not match, it can be corrected by bending.